Pebble Charm Bangle and Earrings

£95.00

* New Workshop * –

This workshop is a new take on the previous charm bangle/earrings workshop and is suitable for beginners. You will make your own sterling silver bangle using slim silver wire (either round or square wire) with a small pebble charm and matching drop earrings. The session will cover a variety of techniques and skills and we will start the day practicing some stamping onto metal so that you can test out the technique and choose a design. I have a wide range of punches including flowers, leaves, feathers, zodiac symbols, marine life, animals/widelife/reptiles, symbols such as yin/yang, stars, moons and hearts to name a few. There are also letter and numbers so that you can add an initial or 2 if you like.

You will make 1 sterling silver bangle and you can choose to use one of the metal bangles dies (a tool that acts like a press to create waves in the bangle) or you can change the shape to create an oval bangle, square, trillion or octagon shapes. Once your bangle has been made we will melt down scrap silver to create some little nuggets of silver that are then formed into pebbles and you can add your chosen stamped design. You will make a total of 3 pebbles that you can then solder on a jump ring/bail. 1 will be attached to the bangle as a charm and the other 2 will be made into a pair of earrings (you can of course choose to add all 3 to your bangle as charms if you prefer). You will be supplied with enough sterling silver wire for your bracelet and a small amount go scrap sterling silver to create your charm and earrings, plus sterling silver findings for your earrings. This workshop starts at 10 am and finishes around 4 pm (Finish time is just a guideline as we may run over).

Please see the website for a full list of course dates.

£95.00 Location : Cheshire

* New Workshop * - This workshop is a new take on the previous charm bangle/earrings workshop and is suitable for beginners. You will make your own sterling silver bangle using slim silver wire (either round or square wire) with a small pebble charm and matching drop earrings. The session will cover a variety of techniques and skills and we will start the day practicing some stamping onto metal so that you can test out the technique and choose a design. I have a wide range of punches including flowers, leaves, feathers, zodiac symbols, marine life, animals/widelife/reptiles, symbols such as yin/yang, stars, moons and hearts to name a few. There are also letter and numbers so that you can add an initial or 2 if you like. You will make 1 sterling silver bangle and you can choose to use one of the metal bangles dies (a tool that acts like a press to create waves in the bangle) or you can change the shape to create an oval bangle, square, trillion or octagon shapes. Once your bangle has been made we will melt down scrap silver to create some little nuggets of silver that are then formed into pebbles and you can add your chosen stamped design. You will make a total of 3 pebbles that you can then solder on a jump ring/bail. 1 will be attached to the bangle as a charm and the other 2 will be made into a pair of earrings (you can of course choose to add all 3 to your bangle as charms if you prefer). You will be supplied with enough sterling silver wire for your bracelet and a small amount go scrap sterling silver to create your charm and earrings, plus sterling silver findings for your earrings. This workshop starts at 10 am and finishes around 4 pm (Finish time is just a guideline as we may run over). Please see the website for a full list of course dates.

Share with friends
Course Details :-
  • In-Person Course
  • 6 hrs

What's included in the price

Silver wire to create a bangle (either round or Square wire). A small square of sterling silver sheet (enough for a small charm and matching earrings) Findings such as rump rings and earring wires/hooks.

Reviews

There are no reviews yet.

Be the first to review “Pebble Charm Bangle and Earrings”

Your email address will not be published. Required fields are marked *

  • In-Person Course

    Simple Stacking Rings

    This workshop is somewhere in-between the simple/single ring and stacking rings class, with design options being simplified. It is perfect if you have never worked with metal and want to try a short taster workshop that isn’t too challenging.

    The idea is to keep it simple with the design, so that you can repeat the process a few times, which helps with the leaning process. We will be using 1.5 mm wire for all rings made, and we will begin by making 1 ring in either copper or brass. You will then make 2 further rings in a similar design from silver. You can make them look a little different by adding a simple texture with a hammer. I also have several ring making dies that will add a wave design to your rings. I have a few different wave designs to choose from. You can wave 2 rings and leave one round if you want or vice versa, see the images below for design examples. (please note, we won’t be twisting wire or using beaded wire for this session)

    There will be a short 30-minute break for lunch during this session, so I would recommend bringing food with you

    £55.00
    Rated 0 out of 5

    Location : Cheshire

    This workshop is somewhere in-between the simple/single ring and stacking ...

  • In-Person Course

    3 Simple Silver Stacking Rings

    Simple Stacking Rings This workshop is somewhere in-between the simple/single ring and stacking rings class with design options being simplified. It is perfect if you have never worked with metal and want to try a short taster workshop that isn’t too challenging. The idea is to keep it simple with the design, so that you can repeat the process a few times, which helps with the learning process. We will be using 1.5 mm round wire for all rings made, and we will begin by making 1 silver ring that you can choose to add some texture to or leave it plain if you prefer. You will then make 2 further rings in a similar design, but you can make your stack of 3 silver rings look a little different by adding texture to 1 or more with a hammer or by adding a wave design. There are a few different wave designs to choose from, and you can wave 2 rings and leave one round if you want or vice versa, or make all 3 the same. (please note, no other wire options are available for the session such as beaded wire, twisted or any of the other fancier design options shown for other workshops)

    Please see the website for a full list of course dates

    £59.00
    Rated 0 out of 5

    Location : Cheshire

    Simple Stacking Rings This workshop is somewhere in-between the simple/single ring and stacking ...

  • In-Person Course

    8 Week Jewellery Making Course

    8 week Course – mixed ability class so suitable for beginners & returning students wanting to expand their jewellery making knowledge. This course runs at regular intervals through the year. Each class is 2 hrs 30 mins and is available on a Monday morning, Wednesday evening or a Friday morning. There is a week off at half term and this usually alines with school holidays.

    Beginners – There is a set scheme of work for beginners so that each week we will build on the skills needed to make your own pieces of jewellery before utilising the skills in a bezel setting project.
    Week 1 – texturing metal using the rolling mill, hammers and design stamps. You will also make a stamped aluminium cuff bangle.
    Week 2 – Saw piercing copper to cut shapes, using a disc cutter to cut shapes, annealing and basic forming to make a copper pendant or earrings.
    Week 3 and 4 – Soldering/ring making including how to make a ring to size and soldering 2 components together.
    Week 5 and 6 – Soldering silver and bezel setting to make a bezel set ring or pendant (either a gemstone, dichroic glass cabochon or sea glass). There will be a charge of around £15 to cover the silver payable by card at the time of this project. Please note the exact amount will be determined at the time of the project due to rising cost of silver.
    Week 7 and 8 – Optional spinner ring project (students to supply own silver for this) or students can choose their projects for the last 2 sessions. Students who wish to complete projects in silver will need to purchase their own silver supplies from a supplier but this can be discussed further into the course. If you have previously attended a 1 day workshop and would like to expand your skills I would recommend starting with the beginners level. (see FAQ page for information).

    Returning/intermediate students – will we start with an optional tube setting project in either week 1 or 2. There will be a charge of around £10 for silver should you wish to attempt it however the exact amount will be determined at the time of the project due to rising cost of silver. Intermediate students are then free to undertake their own projects (there is no set SOW for students not following the beginners scheme of work and students will be responsible for supplying all silver for projects). I can also cover some other techniques on request such as collet setting, claw setting, or students can join in some of the beginners projects such as bezel setting or spinner rings for a skill refresher. Projects can be discussed at the start of the course.

    £230.00
    Rated 0 out of 5

    Location : Cheshire

    8 week Course - mixed ability class so suitable for beginners & returning students wanting ...

  • In-Person Course

    Jewellery School – 4 day Jewellery Making and Silver Smithing Course

    4-Day intensive jewellery making course. This course runs at various dates throughout the year, please see my website for all available dates.  This is a great course for anyone wanting to learn jewellery making. The added benefit of an intensive course is that it really helps embed the knowledge.

    £300.00
    Rated 0 out of 5

    Location : Cheshire

    4-Day intensive jewellery making course. This course runs at various dates throughout the year, ...

  • In-Person Course

    Silver Stacking Rings (with accent shape)

    Accent Stacking Rings – Make a set of 3 sterling silver stacking rings and attach a little accent shape to one.

    The idea is to keep it simple with the design of the 3 rings, so that you can repeat the process a few times which helps with the leaning process. We will be using 1.5 mm round wire for all rings made and we will begin by making 1 simple ring that can be textured or left plain and this will later have the accent shape attached. You will then make 2 further rings in a similar design but you can choose to create a wavy design. I have several ring making dies that will add the wave design to your rings so there are a few different wave designs to choose from. Finally you will solder on a little accent shape to the first ring and this can be made from silver, copper or brass to add contrasting colour and there will be several designs to choose from such as a moon, heart, star, flower or butterfly. (please note, we won’t be twisting wire or using beaded wire for this session)

    There will be a short 30 minute break for lunch during this session so I would recommend bringing food with you.

    £69.00
    Rated 0 out of 5

    Location : Cheshire

    Accent Stacking Rings - Make a set of 3 sterling silver stacking rings and attach ...

  • In-Person Course

    Silver Chain Bracelet

    Silver chain bracelet workshop –

    During this workshop, you will make your own sterling silver chain bracelet. You will be supplied with enough silver to create a series of silver ring shapes that you can add texture to, and you can also create various shapes such as round, oval or square. You will then connect these together with some smaller rings to form a chain before making and adding either a toggle clasp or a ‘S’ hook clasp, This session involves a lot of silver solder so it’s great for soldering practising. Previous silver soldering experience would be an advantage, but it’s not essential.

    £89.00
    Rated 0 out of 5

    Location : Cheshire

    Silver chain bracelet workshop - During this workshop, you will make your own sterling ...

Course Enquiry

Scroll to Top